500-13A-US Flat Pack Forming Plier with Shear Cutter

5" Flat Pack Forming Plier with Shear Cutter. Tool will form a “Gull Wing” and cut multiple leads to length on various types of Flat Packs. Recommended for .010" or smaller lead thickness. Made in USA.

500-13B-US Flat Pack Forming Plier with Shear Cutter

5" Flat Pack Forming Plier with Shear Cutter. Tool will form a “Gull Wing” and cut multiple leads to length on various types of QFP and SOIC packages.  Recommended for .010" or smaller lead thickness. Made in USA.

500-88-US Forming Pliers with Shear Cutter

5" Forming Pliers with Shear Cutter designed to form a consistent stand off and cut the lead to length on most popular radial lead components. Recommended for .025" diameter or smaller leads and wires. Made in USA.

500-89-US Dog Leg Lead Forming Pliers with Shear Cutter

5-1/4" Dog Leg Lead Forming Pliers with Shear Cutter are designed to increase or decrease the center dimension on Radial lead components. The added shear cutter saves component prep time. Recommended for .025" or smaller leads and wires. Made in USA.

500-89B-US Dog Leg Lead Forming Pliers with Shear Cutter

  5-1/4" Dog Leg Lead Forming Pliers with Shear Cutter. Designed to increase or decrease the center dimension on Radial lead components. The added shear cutter saves component prep time. Recommended for .025" or smaller leads and wires. Made in USA.  

530CE-US Transverse Stand off Cutter

5" Transverse Stand off Cutter. A stand off has been added to this transverse cutter. Ideal for maximum full flush cutting in tight access areas. Standard cut off length is .060". Made in USA.

530E-1-US Shear Cutting & Bending Pliers

  5" Shear Cutter and Bending Pliers are designed to cut leads .060" from the P.C. board, then bend the lead to 30 degrees keeping components in place when soldering. Recommended cutting capacity 22 AWG (.025" diameter). Made in USA.  

554TXC-US Shear Cutting & Forming Pliers

5" Shear Cutting and Forming Pliers. These pliers will form one lead in and one lead out at the same time on most Radial type components. The added shear cutter saves component prep time. Recommended for .020" diameter or smaller leads and wires. Made in USA.

900-10 Power Transistor Forming Pliers with Shear Cutter

5-1/2" Power Transistor Forming Pliers with Shear cutter. This tool will cut and form 3 or 5 leads on a TO-220 style component. Leads will be formed to the bottom of component body for surface mounting. Made in USA from Italian Components

900-88B Stress Relief Forming Pliers with Shear Cutter

5-¾" Stress Relief Forming Pliers with Shear Cutter. Tool designed to form stress relief and cut lead to specific dimension in one easy step. Recommended for .020" diameter or smaller leads and wires. Made in USA from Italian Components