PV-250-W4 Porta-Vac II 4" Wafer System

This handling tool kit comes with a 4" wafer tip. A disposable 9V battery is included. Rear exhaust of the pump air is standard on these units. A large on/off switch provides easy on/off control. An internal air filter is replaceable from the front of the tool. The Class 1 exhaust filter ensures clean operation. Made in USA.      

PV-250-W6 Porta-Vac II 6" Wafer System

This handling tool kit comes with a 6" wafer tip. A disposable 9V battery is included. Rear exhaust of the pump air is standard on these units. A large on/off switch provides easy on/off control. An internal air filter is replaceable from the front of the tool. The Class 1 exhaust filter ensures clean operation. Made in USA.

PV-250-W8 Porta-Vac II 8" Wafer System

This handling tool kit comes with a 8" wafer tip. A disposable 9V battery is included. Rear exhaust of the pump air is standard on these units. A large on/off switch provides easy on/off control. An internal air filter is replaceable from the front of the tool. The Class 1 exhaust filter ensures clean operation. Made in USA.

PV-300-W12 Porta-Wand 12" Wafer Vacuum Tool

PV-300-W12 Porta Wand vacuum handling tool. Rechargeable battery operated hand piece with in stand charger and molded 12" wafer tip. Ideal for handling wafers, disk media, flat panels, or any item with flat hard surface. Class 1 performance. Made in USA.

PV-300-W4 Porta-Wand 4" Wafer Vacuum Tool

PV-300-W4 Porta Wand vacuum handling tool. Rechargeable battery operated hand piece with in stand charger and molded 4" wafer tip. Ideal for handling wafers, disk media, flat panels, or any item with flat hard surface. Class 1 performance.

PV-300-W6 Porta-Wand 6" Wafer Vacuum Tool

PV-300-W6 Porta Wand vacuum handling tool. Rechargeable battery operated hand piece with in stand charger and molded 6" wafer tip. Ideal for handling wafers, disk media, flat panels, or any item with flat hard surface. Class 1 performance. Made in USA.

PV-300-W8 Porta-Wand 8" Wafer Vacuum Tool

PV-300-W8 Porta Wand vacuum handling tool. Rechargeable battery operated hand piece with in stand charger and molded 8" wafer tip. Ideal for handling wafers, disk media, flat panels, or any item with flat hard surface. Class 1 performance. Made in USA.

PV-500-H Stainless Steel Wand Handpiece

For 1/8” (3.18mm) ID hose, wafer wand only. The lightweight push-button wafer wand is designed for connection to continuous vacuum systems. Operation is controlled by pushing the button. This tool can be used with an in-house vacuum system or with one of our high performance continuous vacuum systems. Can be used with all of our press-fit tips, adapters and vacuum hoses. Vacuum normally on – Push button to shut off vacuum and to release the wafer. Handling tool constructed from S...

PV-500-W12 Porta-Wand ELITE 12" Vacuum Tool

This kit includes a detachable 9.6V NiMH rechargeable battery pack, an in-stand charger and one 12" vacuum tip. The detachable battery pack contains the rear exhaust filter for the entire tool to ensure better than Class 1 performance. A PUSH-BUTTON provides easy on/off control with a lock to on position. The intake air filter is replaceable from the front of the tool. Made in USA. The battery pack can be recharged when attached to the tool or when separated from the tool. A power on indica...

PV-500-W4 Porta-Wand ELITE 4" Vacuum Tool

This kit includes a detachable 9.6V NiMH rechargeable battery pack, an in-stand charger and one 4" vacuum tip. The detachable battery pack contains the rear exhaust filter for the entire tool to ensure better than Class 1 performance. A PUSH-BUTTON provides easy on/off control with a lock to on position. The intake air filter is replaceable from the front of the tool. Made in USA. The battery pack can be recharged when attached to the tool or when separated from the tool. A power on in...